Manhole Rehabilitation

Uncategorised

Madewell Products Corporation provides high quality mortars and coatings that can be used on a variety of applications. These products can applied as stand alone products or as a system to restore and protect concrete, brick, and steel structures.

Manhole Rehabilitation: Madewell Products Corporation manufactures a variety of products ideal for manhole rehabilitation and sewer structure restoration of any kind.
Pipe Linings: Madewell Products provides cementitious products for restoring drainage pipes and culverts that suffer from corrosion damage. These products enhance structural integrity of the structure and eliminate the need to dig and replace.
Industrial Restoration & Tank Linings: Madewell manufactures high quality epoxy and novolac vinyl ester products that provide maximum chemical resistance in industrial tanks containing corrosive materials. In addition to corrosion protection, Madewell also offers restoration systems for deteriorated structures in need of repair.
Chip & Flake Epoxy Flooring: Madewell provides quality materials for creating attractive quartz and flake floor surfaces and for eliminating moisture in concrete floors.
Aquarium Linings: Madewell Polymer Lining Systems can be used to waterproof, corrosion-proof, and restore concrete structures in aquariums, zoos, and fish hatcheries. These lining systems provide a safe living environment for fresh and salt-water fish and marine mammals.

Madewell manufactures fast set mortars for use in structures that must be placed back into service within a short period of time. These mortars set as quickly as 90 seconds to repair voids and seal leaks in concrete structures. For more information on the best products for your application, please visit our Applications section or contact us.

Mainstay ML-72FS Fast Setting High Strength Patching Mortar: for filling large voids in deteriorated concrete structures
Mainstay ML-10 Hydraulic Cement Mortar: for stopping leaks in deteriorated concrete structures

Madewell's line of calcium aluminate mortars restore and protect concrete structures that experience hydrogen sulfide corrosion, particularly brick and concrete manholes, lift stations, and wet wells. For more information on the best products for your application, please visit our Applications section or contact us.

Mainstay ML-CA Pure Calcium Aluminate Restoration Mortar: applied up to 3" on concrete surfaces with a pH of 2 or higher
Mainstay ML-PF Pure Fused Calcium Aluminate Restoration Mortar: applied up to 3" on concrete surfaces with a pH of 1 or higher

Madewell^® Products Corporation manufactures portland cement based mortars used to restore or resurface concrete structures. For more information on the best products for your application, please visit our Applications section or contact us.

Mainstay ML-72 Sprayable Microsilica Restoration Mortar: applied up to 5" to restore concrete structures that have experienced mild corrosion
Mainstay ML-72P Polymer Modified Sprayable Microsilica Mortar: typically applied at 1/4" or less to resurface roughened concrete
Mainstat ML-72HP Horizontal Pipe Restoration Mortar: typically centrifugally applied at 1" in horizontal pipes in need of repair

Madewell manufactures a variety of urethane and polyaspartic topcoats that provide UV resistance on outside structures or structures exposed to lots of sunlight. For more information on the best products for your application, please visit our Applications section or contact us.

Urethane Coatings:

Madewell 1450 Aliphatic Polyurethane Coating: for use as a topcoat at 5 mils (0.005") WFT to provide UV resistance in immersion service
Madewell 1550 Fluoropolyurethane Coating: for use as a topcoat up to 2.5 mils (0.0025") DFT to provide UV resistance in immersion service

Polyaspartic Coatings:

Madewell 525 Polycarbamide Coating: for use as a topcoat up to 15 mils (0.015") WFT to provide UV resistance in immersion service.

Madewell^® Products Corporation manufactures 100% solids epoxy coatings used to protect concrete and steel structures from corrosion. For more information on the best products for your application, please visit our Applications section or contact us.

Epoxy Primers & Sealers:

Madewell 927 Penetrating Epoxy Primer/Sealer: for priming and sealing concrete
Madewell Permaseal Platinum: for priming and sealing concrete floors for moisture mitigation

100% Solids Epoxy Coatings:

Madewell 806 Sprayable Flexible Joint Sealant & Underlayment: for bridging concrete cracks up to 1/16"
Madewell 806 Trowelable Flexible Joint & Manhole Chimney Seal: for use as a joint filler on manhole frames or where a thick cross-section of flexible material is required
Madewell 1312E 100% Solids Epoxy Saturant: for use in fiberglass reinforcement
Madewell 1312P Sprayable Thixotropic Epoxy Surfacer & Void Filler: for bridging hairline concrete cracks
Madewell 1312P Trowelable Thixotropic Epoxy Surfacer & Void Filler: for use in filling irregular surfaces and voids
Madewell 1312S 100% Solids Epoxy Coating: for use as a topcoat applied up to 20 mils (0.020")
Mainstay^® DS-5 100% Solids Epoxy Coating: for use as a topcoat applied up to 125 mils (0.125")
Mainstay DS-5 FS 100% Solids Fast Set Epoxy Coating: fast-set version of Mainstay DS-5
Mainstay DS-5-S 100% Solids Epoxy Coating: for use as a topcoat applied up to 50 mils (0.050")

Epoxy Novolac Vinyl Ester Coatings:

Mainstay 714 Flake Glass Epoxy Novolac Vinyl Ester Coating: for ultimate corrosion protection against aggressive chemicals

Epoxy Coal Tar Coatings:

Madewell 1103 Epoxy Coal Tar Coating: for use as a topcoat applied up to 30 mils (0.030")
Mainstay DS-4 Ultra High Build Epoxy Coal Tar Coating: for use as a topcoat applied up to 125 mils (0.125")

Madewell Products Corporation has been developing and manufacturing the latest technology in mortar and coating products for over 50 years. These materials are proven to restore and protect concrete and steel surfaces in most wasterwater, industrial, and commercial applications.

Protective Coatings:

Epoxy Coatings: including 100% solids epoxy, vinyl ester, and epoxy coal tar coatings
Urethane & Polyaspartic Coatings: including urethane topcoats, chimney seals, and polycarbamide coatings

Restoration Mortars:

Portland Cement Mortars: for resurfacing or restoring deteriorated concrete structures experiencing mild corrosion
Calcium Aluminate Mortars: for resurfacing or restoring deteriorated concrete structures with a pH of 2 or lower
Fast Set Mortars: for filling large voids and sealing leaks in deteriorated concrete structures