The mixer/pump module consists of a hydraulically powered 7 cubic foot horizontal shaft mortar mixer and a reversible 2L6 rotor/stator pump. Controls for the mixer, pump and dump functions are located directly on the unit.

Mixer in the lower (mixing) position.  Note the ergonomic design and the mixer/pump control location: easy to access and manually actuated so there are no electrical components to fail.

Features and Benefits:

• Hydraulic power for mixer, rotor/stator pump and dump feature provides tons of power and long life with low maintenance

• Ergonomic design puts the top of the mixer at the operator's waist level. Mixer/pump operator can perform the job with less strain and effort.

• Hydraulic cylinders lift the entire mixer unit to dump the contents of mixer into the pump hopper with essentially no effort on the part of the operator.

• Control valves are located for easy access and operation. Operator has full view of all machine functions while using the controls.

• Both the mixer and pump are reversible and both the mixer and the pump are equipped with variable speed controls.

• The entire unit is powder coated a medium gray for ease of cleaning and low maintenance. 

Mixer in the up (dump) position.  Material is effortlessly transfered from the mixer into the pump.  Note how the mixer grate swings clear of the pump hopper in the dump position.

Pump Specifications:

• Maximum output: 1.5 cubic foot per minute, depending on material consistency
• Maximum pumping distance: Vertical: 150 feet, Horizontal: 250 feet, depending on material consistency
• Maximum pressure: 350 psi
• Volume control: Variable
• Pump direction control: Reversible

Mixer Specifications:

• Mixer drum size: 7 cubic feet (practical maximum batch size is approximately 3.5 cubic feet).
• Reversible mixing blades
• Variable speed hydraulic drive
• Variable speed hydraulic dump (both directions)
• Powder coating allows easer cleaning of the equipment. The mixer's practical batch size is 3.5 cubic feet.

Note: Mixer pump unit requires a separate 3,000 psi/12 gpm hydraulic power supply, which is sold separately.